Almost done with the rudder control pedals, next will be fixing them to the floor boards.

What you see here is the back, with an access hole to the nut, just in case……

The two tangs shown on the side are used for:

  1. Connect the cable going backwards to the walking bar and then to the rudder,
  2. Attach a spring to pull the pedal slightly forward, to stop if from "falling" backwards.

img

Below are the pedals in position and fixed to the floor boards. Have used some string for now to see how they work with the walking bar.

Feels good I think ! 🙂

1387540844